AKSESUARLAR - SH 11

Ürün Bilgisi

Photoelectric Scanning Head

Application

The SH 11 model scanning head was especially designed both for scanning of the marks on the rotating discs of mechanical meters or simulated disc marks on LCD displays and for detection of light emitting diodes (LED’s) of electronic meters. The choice of operation with mechanical or electronic meters is made by simple rotation of a selection switch. The precision optical lens is designed to make the scan- ning head insensible to external light. Its compact, robust construction makes the head equally suitable for use in stationary test consoles as well as for use with mobile and portable equipment.

The impulse output of the scanning head delivers a positive output pulse of the duration 0.5 ms.

Disc mark detection with mechanical meters

A pulsed green light beam is used to enable the scanning head to detect the optical contrasts on the perimeter of the disc. The marks may be either red or black, and within this colour range may be rough, matt or shiny or otherwise be marked with strobo- scopic markings.

The manually sensibility set-up for the disc or LCD marks is not necessary. The optimal set-up is auto- matically learned by the integrated teach function, which can be activated by the rotary switch or an external control signal.

Light Emitting Diode (LED) impulse detection with electronic meters

The duration of optical impulse signals from electric meters may be detected and evaluated by use of the SH 11 head. The LED signal from the meter under test must fulfil the following conditions:
The impulse length must be ≥ 100 μs and the impulse pause must be ≥ 600 μs
The changeover from dark to light state must take place in ≤ 20 μs and the change from light to dark be ≤ 100 μs
Short impulses or impulses with a 1:1 ratio (with- out modulation or with an 8 kHz modulated switch-on time) and with a frequency of up to 800 Hz may be scanned
The wavelength of the received signal must lie within the range of 500 – 950 nm

Ürün Kataloğu İçİn Tıklayın!

DİĞER ÜRÜNLER
The scanning head support TVU 7.2 was designed for on site meter testing together with the photoelectric scanning head SH 11.

DETAYLI BİLGİ

The transport cases has been especially designed for the portable test systems PTS 2.1, PTS 2.3 C or PTS 3.1 C and allows transporting the test systems well protected and comfortable to the usage site.

DETAYLI BİLGİ

The transport pocket has been especially designed for the portable working standards PWS 2.3 and PWS 2.3 PLUS and allows transporting the standards well protected and comfortable to the use on site.

DETAYLI BİLGİ

The transport cases are been especially designed for the portable test system PTS 400.3 PLUS and allows transporting the test system well protected and comfortable to the usage site.

DETAYLI BİLGİ