AKSESUARLAR - SH 2003

Ürün Bilgisi

Photoelectric Scanning Head SH 2003

Application

The SH 2003 photoelectric scanning head is suitable for use with both LED impulse elec- tronic meters and Ferraris meters, selectable via a switch. Due to its high performance and robust construction it is suitable for both test consoles and portable systems.
Rotor disk scanning of Ferraris meters
The pulsed green light beam allows optimal recognition of differing disk marks, including red, black, matt and gloss. The signal output from the beginning to the end of the black mark is at a positive high level.
LED scanning of static meters
Optical impulse signals from electronic meters can be received and evaluated using the SH 2003 scanning head. The optical output of the electronic meter must have the following crite- ria:
1. The impulse length must be greater than 60 s.
2. With an LED signal having a space ratio 1:2, the frequency must be less than 500 Hz.
3. The wave-length of the received signal must be within the range 500 – 1000 nm.
The impulse output of the scanning head deliv- ers a positive impulse of approximately 1 ms on receipt of an LED signals impulse.

Ürün Kataloğu İçİn Tıklayın!

DİĞER ÜRÜNLER
The scanning head support TVU 7.2 was designed for on site meter testing together with the photoelectric scanning head SH 11.

DETAYLI BİLGİ

The transport cases has been especially designed for the portable test systems PTS 2.1, PTS 2.3 C or PTS 3.1 C and allows transporting the test systems well protected and comfortable to the usage site.

DETAYLI BİLGİ

The transport pocket has been especially designed for the portable working standards PWS 2.3 and PWS 2.3 PLUS and allows transporting the standards well protected and comfortable to the use on site.

DETAYLI BİLGİ

The transport cases are been especially designed for the portable test system PTS 400.3 PLUS and allows transporting the test system well protected and comfortable to the usage site.

DETAYLI BİLGİ