The SHC range of scanning head supports has been designed for use with the SH 2003 and SH 11 model scanning heads. The range is user friendly and offers a high degree of flexibility.

The modular Evaluation System SMM 400 providing error calculation, testing of emitting contacts and communication to tariff device units to the meter under test.Four different versions cover the customer requirements.
• Meter error calculator with SMM 400 bus-master
without error display
• Basic meter error calculator with SMM 400 busmaster and SMM 400 – error calculator module
• Standard evaluation system with SMM 400+ busmaster and SMM 400+ system evaluation module
• Extended evaluation system with SMM 400 BusMaster, SMM 400+ system evaluation module and
addition IN/OUT module for 8 in- and 8 outputs and
or COM communication module

In many meter test stations, separation of energized parts and user cannot be realized by means of stationary separating safety equipment. For this reason, movable or non-separating safety equipment is used. To allow the use of safety switches or light curtains in meter testing stations, a safety related signal evaluation is required. Here a safety relay analyzes the starting conditions and in case of need interrupts the dangerous voltage.

Technical information for eMOB I-200.1 DC:

PWS 3.3 GEnx is a combination of Portable 0.05% class Test and Calibration Device and IEC 61000-4-30 Class A compatible Power Quality Analyzer with 4 voltage (U1, U2, U3, UN, UPE) and 4 current channels (direct current: I1, I2, I3 and clamp AT: IN/IPE Neutral current/Ground Protection current).

The modular concept of the PWS 3.3 GEnx allows the direct current measurement December to be extended from 12A to 120A. The addition of a battery pack, measurement during Power Quality recording
it is possible to supply from the voltage or from the main network
when it is not, it allows the device to continue working.

The new eMOB I-32.3 AC test adapter, together with the PWS 2.3 GEnx portable Test and Calibration device, provides comprehensive on-site testing of AC charging stations for electric vehicles.

This is a prerequisite for precise billing, taking into account the Decrement of the energy charged to the battery of the electric vehicle, the voltage drop between the internal electricity meter and the output of the charging station.

The eMOB I-32.3 AC is also equipped with type 2 (“Mennekes socket”) charging connectors in accordance with the EN 62196 standard.

Technical information for PWS 2.3 genX:

Auxiliary power supply:Power may be taken from the auxiliary supply or the measuring circuit at:
                                 46 VACmin … 300 VACmax, 47 Hz … 63 Hz
                                 65 VDCmin … 423 VDCmax
Protection: up to 440 VACmax

External 12 V DC supply:10 VDCmin … 14.4 VDCmax

Frequency range:47 Hz … 63 Hz

Power consumption: max. 15W / 30 VA
Housing: Hard Plastic
Dimensions: W 308 x H 173 x D 70 mm
Weight: approx. 1.5 kg
Operation temperature: -10 °C … +50 °C
Storage temperature: –20 °C … +60 °C
Relative humidity ≤ 85% at Ta ≤ 21°C
                          ≤ 95% at Ta ≤ 25°C, 30 days / year spread

Mechanical Mounting Bottom side or top mounting
Dimension 64x58x35 mm
Materials Casing Die-casting aluminum November
Environmental Operating Temperatures -40 to 150 °C
Weather resistant IP65 Compliant
Electrical Connection type Screw terminals
Input Voltage 24 VDC
Output Current 4-20 mA
Standard PH 0 DIN EN 60751 - Class B
4 wires

Mechanical Mounting Bottom side or top mounting
Dimension 64x58x35 mm
Materials Casing Die-casting aluminum November
Environmental Operating Temperatures -40 to 150 °C
Weather resistant IP65 Compliant
Electrical Electrical Connection type Screw terminal
Input Voltage 24 VDC
Output Tip 4-20 mA
Standard PH 0 DIN EN 60751 - Class B
4 wires