The SCD 2003 scanning head support was designed for on-site meter testing with the SH 2003 photoelectric scan- ning head.
The spring mechanism and the different adjusting options make it possible to attach the scanning head support to the meter as desired.
Virtually all commonly available meter types may be tested by the large fixation range.
The integrated spring wire provides a fast and simple method for fixing the scanning head support to the meter.
Because of the high repeatability of the measuring position several meters of the same type can be tested efficiently.
Fine adjustment is used for the precise positioning of the scanning head.
Adjusting to below size and pulling out the spring loaded mountings produces the required force to attach the scan- ning head securely to the meter.
The fixation range is determined by displacement of the upper plate and fixed with a locking screw.
The mounting board of the scanning head can be adjusted at height so that a fine alignment of the scanning head is possible.
The SCD 2003 scanning head support is used to test meters on sites at which quired.
Adapter for ANSI meters